TP 10ft Genius Round Blue Trampoline with Igloo Door

 

This is TP's latest design in trampoline with an Igloo door,  The safety enclosure is an integeral part of the trampoline and attaches onto the trampoline bed (the bit you jump on) because of this the user on the trampoline can not come into contact with any of the trampoline springs.  A FREE Cover, Ladder and integeral shoe tidy is included with every TP Genius Round SurroundSafe Trampoline.  Use by more than one person at a time is clearly possible but we do not recommend this for reasons of saftey. 

 

The Genius SurroundSafe trampoline is also available with an octagonal frame but beware the equivalent sized trampoline has a smaller jumping area, yet it will take up more room in your garden because the trampoline legs curve outwards. This will add about 45cm 18" to the size of the trampoline which can be a lot if space is tight.

 

Frame:

Trampoline

Welded in construction (so easy to build, with no nuts and bolts) 1.5m gauge galvanised steel frame covered by a 10 year warranty against rust causing failure.  The top rails of each trampoline frame are now fitted with a plastic inset which provides an interlocking fit. This prevents twisting of the frame and results in a uniform bounce.  The trampoline legs are now painted black

 

Surround: 

8 x Upright poles that attach on to the trampoline leg with one clamp and one through bolt.

 

Trampoline Bed:

Weatherproof, soft surface UV stabilised, polypropylene woven mesh mat with multiple lines of perimeter stitching, the mesh allows for easy drainage, so ideal for outside use.  Fitted with V rings and is marked with the tp logo.   

 

Trampoline Springs:

60 x 178cm (7") zinc coated steel spring.

 

Frame Pads:

Trampoline

Because the SurroundSafe enclosure is attached to the trampoline bed, so the user is not likely to land on the trampoline springs there is no padding that sits on top of the springs.  There is some round padding fitted onto the outside frame.

Surround: 

Uprights covered in EPE foam.

 

Assembly:

Trampoline

Simple slot together frame (no tools required), fit the springs to the trampoline bed, slot the springs into the trampoline frame.

Surround: 

Slot together poles and bolt onto trampoline leg (tool supplied). fit the netting and then clip onto trampoline.

 

Trampoline Safety 

No more than one person at a time on the trampoline.  Multiple jumpers increase the risk of injury.  Do not perform somersaults (flips), paralysis or death may result if you land on your head or neck.  Adult supervision recommended.